VT604 / Switching PDU

Device is used for load management and allows to switch on/off or reboot up to 4 outlets.

It has built-in temperature sensor, can connect 2 additional sensors, 2 dry contacts, two 12V devices (for example, alarm beacons), GSM modem and USB-сam.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog.

MSRP price: 379,00 €

Add to wishlist

 Add to comparison


4 switched outlets

VT604 has 4 switched outlets. They can be controlled individually or as a group using web interface. Outlets can also be managed with predefined logic.




Analog sensors 2x.jpg

LEDs on front panel

LEDs for indication of outlet status, appliance status, electronic relay status, CAN status and errors.




Analog sensors 2x.jpg

Sensors ports

Connect sensor by a supplied RJ-11 (6P4C) cable to any "A1 - A2" port. Determination of the sensor type and connection will occur automatically.



CAN port

Connecting CAN devices on a common bus allows you to collect data from the sensors with a large area, or from a large distance and to transmit them to the network.




12V outputs for alarms

Appliance has the possibility to connect flash lights or sirens managed by built-in electronic relay.



Temperature sensor

Temperature sensor is built-in on a board and sticks out on the front panel of the unit for better measurement. Accuracy equals +/- 1°C.



2 Dry contacts.jpg

Dry contact inputs

VT604 has 2 dry contact inputs. Can be used together with any contacts, for example with door or window contacts, circuit breakers etc.


Extension: GSM modem

VT604 has the possibility to install GSM modem. It is used for sending SMS notifications and receiving SMS commands.


USB camera

USB camera (class Linux UVC Webcam which supports MPEG) can be connected to "HS" port.


IP cameras

Using built-in interface it is possible to add up to four IP cameras. This will allows to view footagefrom surveillance cameras remotely,


USB flash drive

USB flash drive can be connected to VT805 using OTG miniUSB cable and can be used by the system for saving logs. More USB devices can be connected to one HS USB port using USB hub.



LAN

Ethernet 10/100 Base-T port, provides network connection.

Dimensions 440 x 44.45 (1U) x 79 mm
Weight 1,5 kg
Inputs 2 inlets C14 (240V, 10A), 2 analog sensors, HS USB, CAN bus, 2 dry contacts (3P, pitch 3,5mm, type IN)
Operating characteristics Humidity : Min. 5% - Max. 95% (Non-Condensing), Temperature : Min. -10° C - Max.80° C
Power input 1 inlet C14, 240V, 10A
Network Interface CAN bus, CAN open, Ethernet 10/100 Mbit/s
Outputs 4 outlets C13, Two 12V 0,25A outputs (pitch 3,81mm, 3P), SMA GSM
Mounting Wall turnable mount (with extension), 19" rack mountable
Extension protocols CAN
Expansions (ordered separately) VT700 / GSM modem
Power Consumption 10 Watt
Status Indicators 4 orange LEDs for outlet status, Error LED, LED indication for CAN bus connection, LED indication for Power / Network connectivity, Two relay status LEDs
Components Manufactured in E.U.
Max. distance 225 m
HS Code 8471 50 000
Processor ARM926-300 MHz / 64 MB / Linux-2.6.38
Built-in sensors Temperature sensor (1%), Power supply voltage sensor (1%)
Package includes EU Schuko C13 0.5 mm2 230V 10A cable, Self-adhesive rubber foot - 4 pcs, Warranty card, Short description and connection guide, RJ-45 1m patch cable, Terminal plug 3 pins, 3.5 mm - 1 pcs, Terminal plug 2 pins, 3.81 mm - 1 pc, 2 x 19" brackets, 6 screws M3*8
Accessories (ordered separately) VT112 / Rotatable mounting brackets
Other Chassis grounding (M4 thread), Restart button, Recovery switch

Write a review

VT604 / Switching PDU

VT604 / Switching PDU

Device is used for load management and allows to switch on/off or reboot up to 4 outlets.

It has built-in temperature sensor, can connect 2 additional sensors, 2 dry contacts, two 12V devices (for example, alarm beacons), GSM modem and USB-сam.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog.



Embedded monitoring and control web interface

Every Vutlan remote monitoring unit or PDU has an embedded web-interface. This interface allows the users to monitor and control all the sensors and devices connected to the unit by using a web browser. Simply connect the master unit to the network and enter it’s IP address in the web browser.

Login: guest

Password: guest

TRY DEMO


Support for SNMP based NMS software

Network monitoring software software monitor your network 24/7 to timely alert you to issues before they become emergencies. Allow you to achieve instant awareness of IT infrastructure problems, so downtime doesn't adversely affect your business. Usual NMS software offers complete monitoring and alerting for servers, switches, applications, and services. By integrating Vutlan’s environmental monitoring systems and PDUs, you achieve a complete control over your IT infrastructure in one place.

All Vutlan’s monitoring units support SNMP v.1, v.2c, v.3. Required MIB files are included with all Vutlan systems. So integrating Vutlan’s systems into your existing NMS is simple. Vutlan systems support the following NMS systems.


Vutlan units support the following NMS systems:

SEE THE LIST


Infrastructure monitoring program (Nagios)

Achieve instant awareness of IT infrastructure problems, so downtime doesn’t adversely affect your business. Nagios together with Vutlan plugin offers complete monitoring and alerting for servers, switches, applications, and services.

You can:

  • Monitor your entire IT infrastructure
  • Spot problems before they occur
  • Know immediately when problems arise
  • Share availability data with stakeholders
  • Detect security breaches
  • Plan and budget for IT upgrades
  • Reduce downtime and business losses

You can download and install Vutlan plugin directly into Nagios or download a disk image that includes VirtualBox, CentOS 6.5, Nagios 3.5.1 and Vutlan plugin preinstalled into Nagios.




Drivers & Recovery tools

All the drivers and recovery tools can be found at our documentation pages.

You will find:

  • Drivers - HTTP or USB upgrade
  • Firmware recovery tool - if the system does not respond
  • Settings recovery tool - for restoring factory settings
  • Reset Password tool - for resetting the password.
  • Detect security breaches
  • Plan and budget for IT upgrades
  • Reduce downtime and business losses

The documentation, explaining how to update or restore the units, as well as the drivers, can be found using following links:



Dublicator

This program is designed to clone the unit settings and units firmware update. This is needed in case you have multiple units and you require to copy all or some of the settings of one unit to other units.




Program to send SMS from your computer

Contains an application and a sample code in C.



Sensors to Optimize Your Environment

Support for up to 100 optional external plug-and-play environment sensors that monitor and help manage critical environmental conditions. the sensors use their 4 levels of threshold checking and report any status change.



Scalability

The amount of sensors and devices connected to one master module may be increased using embedded modules, extension units, CAN sensors and analog chainable sensors.






Two / Three Year Warranty

All our monitoring units have a 2 Year Warranty. Additional third year warranty can be purchased separately.




Embedded Web/Mobile Interface

Real-time remote monitoring of all sensor data and asset information and status of all devices in the rack. We offer easy to use web browser interface for settings changes and viewing real-time sensor status, setting up alerts and notifications from anywhere.


Latest Blogs