VT325 / Room Guard

The unit is used for temperature, humidity, voltage, leakage, smoke, airflow, doors control in small facilities. It has built-in temperature sensor, can connect up to 12 sensors and 2 dry contacts, 2 alarm beacons, 1-Wire board, USB modem or USB-сam.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog.

MSRP price: 198,00 €

Add to wishlist

 Add to comparison

2 analog ports.jpg

Sensors ports

Connect sensor by a supplied RJ-11 (6P4C) cable to any"A1 - A2" port. Determination of the sensor type and connection will occur automatically.



12V outputs for alarms

Appliance has the possibility to connect two devices (for example, alarm beacons) managed by built-in electronic relay.



2 Dry contacts.jpg

Dry contact inputs

VT325 has 2 dry contact inputs. Can be used together with any contacts, for example with door or window contacts, circuit breakers etc.




HS USB

Type miniAB USB-port 2.0, Can connect USB camera; or connect a PC for restoring an appliance; or connect USB flash for saving logs.



Temperature sensor

Temperature sensor is built-in on VT325 board and sticks out from the top of the enclosure of the unit for better measurement. Accuracy equals +/- 1°C.



1-wire extension.jpg

Extension: 1-Wire board

VT325 has the possibility to install "VT10 / 1-Wire board" exntension (ordered separately). Native Vutlan 


USB camera / IP cameras

USB camera (class Linux UVC Webcam which supports MPEG) can be connected to "HS" port. Using built-in interface it is possible to add IP cameras. This will allows to view footage from surveillance cameras remotely,


USB flash drive

USB flash drive can be connected to VT325 using OTG miniUSB cable. Flash drive is used by the system for saving logs. More USB devices can be connected to one HS USB port using USB hub.



LEDs ACT E1 E2 ERROR.jpg

LEDs

"ACT" - indicates appliance status, "E1" - indicates 12V "E1" relay status, "E2" - indicates 12V "E2" relay status, "ERROR»" - indicates error and traffic.



12V DC_1.jpg

DC power input

Power adapter DC 12V 500mA.



Earthing2.jpg

Chassis grounding

VT325 has possibility to connect external chassis grounding (M4 thread).



LAN

Ethernet 10/100 Base-T port, provides network connection.

Dimensions W139 x H33.1 x D79mm
Weight 0.5 kg
Inputs 2 analog sensors, HS USB, 2 dry contacts (3P, pitch 3,5mm, type IN)
Operating characteristics Humidity : Min. 5% - Max. 95% (Non-Condensing), Temperature : Min. -10° C - Max.80° C
Power input 12V DC, 0,5A
Network Interface Ethernet 10/100 Mbit/s, 1-Wire (with extension)
Outputs Two 12V 0,25A outputs (pitch 3,81mm, 3P)
Mounting Wall mount, Desktop, Wall turnable mount (with extension), 19" rack mount holes (brackets not included)
Expansions (ordered separately) VT10 / 1-Wire Board
Power Consumption 6 Watt
Status Indicators LED indication for Power / Network connectivity, Error LED, Two relay status LEDs
Components Manufactured in E.U.
Max. distance 100 m
HS Code 8471 50 000
Processor ARM926-300 MHz / 64 MB / Linux-2.6.38
Built-in sensors Power supply voltage sensor (1%), Temperature sensor (1%)
Accessories (ordered separately) VT112 / Rotatable mounting brackets
Other Restart button, Recovery switch, Chassis grounding (M4 thread)

Write a review

VT325 / Room Guard

VT325 / Room Guard

The unit is used for temperature, humidity, voltage, leakage, smoke, airflow, doors control in small facilities. It has built-in temperature sensor, can connect up to 12 sensors and 2 dry contacts, 2 alarm beacons, 1-Wire board, USB modem or USB-сam.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog.



Embedded monitoring and control web interface

Every Vutlan remote monitoring unit or PDU has an embedded web-interface. This interface allows the users to monitor and control all the sensors and devices connected to the unit by using a web browser. Simply connect the master unit to the network and enter it’s IP address in the web browser.

Login: guest

Password: guest

TRY DEMO


Support for SNMP based NMS software

Network monitoring software software monitor your network 24/7 to timely alert you to issues before they become emergencies. Allow you to achieve instant awareness of IT infrastructure problems, so downtime doesn't adversely affect your business. Usual NMS software offers complete monitoring and alerting for servers, switches, applications, and services. By integrating Vutlan’s environmental monitoring systems and PDUs, you achieve a complete control over your IT infrastructure in one place.

All Vutlan’s monitoring units support SNMP v.1, v.2c, v.3. Required MIB files are included with all Vutlan systems. So integrating Vutlan’s systems into your existing NMS is simple. Vutlan systems support the following NMS systems.


Vutlan units support the following NMS systems:

SEE THE LIST


Infrastructure monitoring program (Nagios)

Achieve instant awareness of IT infrastructure problems, so downtime doesn’t adversely affect your business. Nagios together with Vutlan plugin offers complete monitoring and alerting for servers, switches, applications, and services.

You can:

  • Monitor your entire IT infrastructure
  • Spot problems before they occur
  • Know immediately when problems arise
  • Share availability data with stakeholders
  • Detect security breaches
  • Plan and budget for IT upgrades
  • Reduce downtime and business losses

You can download and install Vutlan plugin directly into Nagios or download a disk image that includes VirtualBox, CentOS 6.5, Nagios 3.5.1 and Vutlan plugin preinstalled into Nagios.




Drivers & Recovery tools

All the drivers and recovery tools can be found at our documentation pages.

You will find:

  • Drivers - HTTP or USB upgrade
  • Firmware recovery tool - if the system does not respond
  • Settings recovery tool - for restoring factory settings
  • Reset Password tool - for resetting the password.
  • Detect security breaches
  • Plan and budget for IT upgrades
  • Reduce downtime and business losses

The documentation, explaining how to update or restore the units, as well as the drivers, can be found using following links:



Dublicator

This program is designed to clone the unit settings and units firmware update. This is needed in case you have multiple units and you require to copy all or some of the settings of one unit to other units.




Program to send SMS from your computer

Contains an application and a sample code in C.



Sensors to Optimize Your Environment

Support for up to 100 optional external plug-and-play environment sensors that monitor and help manage critical environmental conditions. the sensors use their 4 levels of threshold checking and report any status change.



Scalability

The amount of sensors and devices connected to one master module may be increased using embedded modules, extension units, CAN sensors and analog chainable sensors.






Two / Three Year Warranty

All our monitoring units have a 2 Year Warranty. Additional third year warranty can be purchased separately.




Embedded Web/Mobile Interface

Real-time remote monitoring of all sensor data and asset information and status of all devices in the rack. We offer easy to use web browser interface for settings changes and viewing real-time sensor status, setting up alerts and notifications from anywhere.


Related Products

Latest Blogs