The unit is used in data centers, remote & industrial facilities, offices. Can connect up to 30 sensors, 12 dry contacts, two 12V alarm beacons, GSM modem, USB-сam, SD card, 1-Wire board for reader or board with 8 dry contacts, two relais 10A 230V and power backup input.
There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog.
Warning: Last items in stock!
Connect sensor by a supplied RJ-11 (6P4C) cable to any sensor port "A1 .. A8". Determination of the sensor type and connection will occur automatically.
Temperature sensor is built-in on a board and sticks out on the front panel of the unit for better measurement. Accuracy equals +/- 1°C.
The unit has two 12V 0.25A outputs (electronics relays). E.g. the appliance has the possibility to connect alarm beacons managed by built-in electronic relays.
Connecting CAN devices on a common bus allows you to collect data from the sensors with a large area, or from a large distance and to transmit them to the network. VT825 has a LED for CAN bus status indication.
VT805 has 4 dry contact inputs. Can be used together with any contacts, for example with door or window contacts, circuit breakers etc.
VT805 has the possibility to install GSM or USB modem. VT700 GSM modem is mounted and connected inside of master unit. It is used for sending SMS notifications and receiving SMS commands.
Board is mounted and connected inside of "VT825 / Monitoring unit". Adds 8 dry contacts (IN), 2 loads (latching relays with LEDs indicators on front panel) & 12V DC power backup terminal. VT825 allows to install either VT18 or VT10, both extension can not be installed at the same time.
Using built-in interface it is possible to add up to four IP cameras. This will allows to view footagefrom surveillance cameras remotely,
One USB camera (class Linux UVC Webcam which supports MPEG) can be connected to "USB" port. More USB devices can be connected to one USB port using USB hub.
USB flash drive can be connected to VT805 using OTG miniUSB cable and can be used by the system for saving logs. More USB devices can be connected to one USB port using USB hub.
"ACT" - indicates appliance status, "E1" - indicates 12V "E1" relay status, "E2" - indicates 12V "E2" relay status, "ERROR»" - indicates error and traffic, "CAN" - indicates BUS status.
Chassis external ground earthing, to suppress electromagnetic interference.
Ethernet 10/100 Base-T port, provides network connection.
The inlet uses 2A fuse (5x20mm) which can be easily changed.
|Dimensions||Width 440 x Height 44.45 (1U) x Depth 79.4 mm|
|Inputs||8 analog sensors, CAN bus, HS USB, 4 dry contacts (3P, pitch 3,5mm, type IN)|
|Operating characteristics||Humidity : Min. 5% - Max. 95% (Non-Condensing), Temperature : Min. -10° C - Max.80° C|
|Power input||90-240V, IEC C14, Fuse 2A|
|Network Interface||CAN bus, 1-Wire (with extension), Ethernet 10/100 Mbit/s|
|Outputs||SD card slot, USB port for saving logs (USB flash), Two 12V 0,25A outputs (pitch 3,81mm, 3P)|
|Mounting||Desktop, Wall turnable mount (with extension), 19" rack mountable|
|Expansions (ordered separately)||"VT10 / 1-Wire Board" or "VT18 / Extension board", VT700 / GSM modem|
|Power Consumption||12 Watt|
|Status Indicators||Two relay status LEDs, LED indication for Power / Network connectivity, Error LED, LED indication for CAN bus connection|
|Components||Manufactured in E.U.|
|Max. distance||300 m|
|HS Code||8471 50 000|
|Processor||ARM926-300 MHz / 64 MB / Linux-2.6.38|
|Built-in sensors||Power supply voltage sensor (1%), Temperature sensor (1%)|
|Package includes||Warranty card, Short description and connection guide, Terminal plug 6 pins, 3.5 mm - 1 pcs, Terminal plug 3 pins, 3.81 mm - 1 pcs, Self-adhesive rubber foot - 4 pcs, RJ-45 1m patch cable, EU Schuko C13 0.5 mm2 230V 10A cable, 6 screws M3*8, 2 x 19" brackets|
|Accessories (ordered separately)||VT112 / Rotatable mounting brackets, VT101 / Battery holder|
|Other||Chassis grounding (M4 thread), Recovery switch, Restart button|
Every Vutlan remote monitoring unit or PDU has an embedded web-interface. This interface allows the users to monitor and control all the sensors and devices connected to the unit by using a web browser. Simply connect the master unit to the network and enter it’s IP address in the web browser.
Password: guestTRY DEMO
Network monitoring software software monitor your network 24/7 to timely alert you to issues before they become emergencies. Allow you to achieve instant awareness of IT infrastructure problems, so downtime doesn't adversely affect your business. Usual NMS software offers complete monitoring and alerting for servers, switches, applications, and services. By integrating Vutlan’s environmental monitoring systems and PDUs, you achieve a complete control over your IT infrastructure in one place.
All Vutlan’s monitoring units support SNMP v.1, v.2c, v.3. Required MIB files are included with all Vutlan systems. So integrating Vutlan’s systems into your existing NMS is simple. Vutlan systems support the following NMS systems.
Vutlan units support the following NMS systems:SEE THE LIST
Achieve instant awareness of IT infrastructure problems, so downtime doesn’t adversely affect your business. Nagios together with Vutlan plugin offers complete monitoring and alerting for servers, switches, applications, and services.
You can download and install Vutlan plugin directly into Nagios or download a disk image that includes VirtualBox, CentOS 6.5, Nagios 3.5.1 and Vutlan plugin preinstalled into Nagios.
All the drivers and recovery tools can be found at our documentation pages.
You will find:
The documentation, explaining how to update or restore the units, as well as the drivers, can be found using following links:
This program is designed to clone the unit settings and units firmware update. This is needed in case you have multiple units and you require to copy all or some of the settings of one unit to other units.
Support for up to 100 optional external plug-and-play environment sensors that monitor and help manage critical environmental conditions. the sensors use their 4 levels of threshold checking and report any status change.
All our monitoring units have a 2 Year Warranty. Additional third year warranty can be purchased separately.
Real-time remote monitoring of all sensor data and asset information and status of all devices in the rack. We offer easy to use web browser interface for settings changes and viewing real-time sensor status, setting up alerts and notifications from anywhere.
The unit is used for temperature, humidity, voltage, leakage, smoke, airflow,...
The unit is used for environmental control in small facilities. Can connect...