Device is used for load management and allows to switch on/off or reboot up to 4 outlets.
It has built-in temperature sensor, can connect 2 additional sensors, 2 dry contacts, two 12V devices (for example, alarm beacons), GSM modem and USB-сam.
There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog.
Warning: Last items in stock!
Connecting CAN devices on a common bus allows you to collect data from the sensors with a large area, or from a large distance and to transmit them to the network.
Temperature sensor is built-in on a board and sticks out on the front panel of the unit for better measurement. Accuracy equals +/- 1°C.
VT604 has 2 dry contact inputs. Can be used together with any contacts, for example with door or window contacts, circuit breakers etc.
Using built-in interface it is possible to add up to four IP cameras. This will allows to view footagefrom surveillance cameras remotely,
USB flash drive can be connected to VT805 using OTG miniUSB cable and can be used by the system for saving logs. More USB devices can be connected to one HS USB port using USB hub.
|Dimensions||440 x 44.45 (1U) x 79 mm|
|Inputs||2 inlets C14 (240V, 10A), 2 analog sensors, HS USB, CAN bus, 2 dry contacts (3P, pitch 3,5mm, type IN)|
|Operating characteristics||Humidity : Min. 5% - Max. 95% (Non-Condensing), Temperature : Min. -10° C - Max.80° C|
|Power input||1 inlet C14, 240V, 10A|
|Network Interface||CAN bus, CAN open, Ethernet 10/100 Mbit/s|
|Outputs||4 outlets C13, Two 12V 0,25A outputs (pitch 3,81mm, 3P), SMA GSM|
|Mounting||Wall turnable mount (with extension), 19" rack mountable|
|Expansions (ordered separately)||VT700 / GSM modem|
|Power Consumption||10 Watt|
|Status Indicators||4 orange LEDs for outlet status, Error LED, LED indication for CAN bus connection, LED indication for Power / Network connectivity, Two relay status LEDs|
|Components||Manufactured in E.U.|
|Max. distance||225 m|
|HS Code||8471 50 000|
|Processor||ARM926-300 MHz / 64 MB / Linux-2.6.38|
|Built-in sensors||Temperature sensor (1%), Power supply voltage sensor (1%)|
|Package includes||Cable EU Schuko C13 0.5mm2 230V 10A, Self-adhesive rubber foot 4 pcs, Warranty card, Short description and connection guide, Patch cable RJ-45 1m, Terminal plug 3 pins 3.5mm 1pcs, Terminal plug 2 pins 3.81mm 1pc, 19" mounting brackets 2pcs, Screws 6pcs M3 8mm|
|Accessories (ordered separately)||VT112 / Rotatable mounting brackets|
|Other||Chassis grounding (M4 thread), Restart button, Recovery switch|
Every Vutlan remote monitoring unit or PDU has an embedded web-interface. This interface allows the users to monitor and control all the sensors and devices connected to the unit by using a web browser. Simply connect the master unit to the network and enter it’s IP address in the web browser.
Password: guestTRY DEMO
Network monitoring software software monitor your network 24/7 to timely alert you to issues before they become emergencies. Allow you to achieve instant awareness of IT infrastructure problems, so downtime doesn't adversely affect your business. Usual NMS software offers complete monitoring and alerting for servers, switches, applications, and services. By integrating Vutlan’s environmental monitoring systems and PDUs, you achieve a complete control over your IT infrastructure in one place.
All Vutlan’s monitoring units support SNMP v.1, v.2c, v.3. Required MIB files are included with all Vutlan systems. So integrating Vutlan’s systems into your existing NMS is simple. Vutlan systems support the following NMS systems.
Vutlan units support the following NMS systems:SEE THE LIST
Achieve instant awareness of IT infrastructure problems, so downtime doesn’t adversely affect your business. Nagios together with Vutlan plugin offers complete monitoring and alerting for servers, switches, applications, and services.
You can download and install Vutlan plugin directly into Nagios or download a disk image that includes VirtualBox, CentOS 6.5, Nagios 3.5.1 and Vutlan plugin preinstalled into Nagios.
All the drivers and recovery tools can be found at our documentation pages.
You will find:
The documentation, explaining how to update or restore the units, as well as the drivers, can be found using following links:
This program is designed to clone the unit settings and units firmware update. This is needed in case you have multiple units and you require to copy all or some of the settings of one unit to other units.
Support for up to 100 optional external plug-and-play environment sensors that monitor and help manage critical environmental conditions. the sensors use their 4 levels of threshold checking and report any status change.
All our monitoring units have a 2 Year Warranty. Additional third year warranty can be purchased separately.
Real-time remote monitoring of all sensor data and asset information and status of all devices in the rack. We offer easy to use web browser interface for settings changes and viewing real-time sensor status, setting up alerts and notifications from anywhere.