VT825 / Wide range monitoring unit

Middle level unit is used in computer rooms, remote & industrial facilities, offices. Can use up to 100 different elements - notifications, triggeres, timers, logics, sensors, dry contacts.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog.

MSRP price: 379,00 €

Add to wishlist

 Add to comparison

Sensor ports

Connect sensor by a supplied RJ-11 (6P4C) cable to any sensor port "A1 .. A8". Determination of the sensor type and connection will occur automatically.



Temperature sensor

Temperature sensor is built-in on a board and sticks out on the front panel of the unit for better measurement. Accuracy equals +/- 1°C.



12V outputs

The unit has two 12V 0.25A outputs (electronics relays). E.g. the appliance has the possibility to connect alarm beacons managed by built-in electronic relays.



CAN port

Connecting CAN devices on a common bus allows you to collect data from the sensors with a large area, or from a large distance and to transmit them to the network. VT825 has a LED for CAN bus status indication.



Dry contact inputs

VT805 has 4 dry contact inputs. Can be used together with any contacts, for example with door or window contacts, circuit breakers etc.


Extension: SD card

SD card or USB stick can be used by the system for saving logs.


Extension: GSM modem

VT805 has the possibility to install GSM or USB modem. VT700 GSM modem is mounted and connected inside of master unit. It is used for sending SMS notifications and receiving SMS commands.


VT18 extension (for VT825).jpg

Extension: VT18 (ordered separately)

Board is mounted and connected inside of "VT825 / Monitoring unit". Adds 8 dry contacts (IN), 2 loads (latching relays with LEDs indicators on front panel) & 12V DC power backup terminal. VT825 allows to install either VT18 or VT10, both extension can not be installed at the same time.



1-wire extension.jpg

Extension: "VT10 / 1-Wire board" (ordered separately)

1-Wire board can be installed insideof monitoring unit to connect access reader or accurate temperature sensors. VT825 allows to install either VT18 or VT10, both extension can not be installed at the same time.


IP cameras

Using built-in interface it is possible to add up to four IP cameras. This will allows to view footagefrom surveillance cameras remotely,


USB camera

One USB camera (class Linux UVC Webcam which supports MPEG) can be connected to "USB" port. More USB devices can be connected to one USB port using USB hub.


USB flash drive

USB flash drive can be connected to VT805 using OTG miniUSB cable and can be used by the system for saving logs. More USB devices can be connected to one USB port using USB hub.



LEDs ACT E1 E2 ERROR.jpg

LEDs

"ACT" - indicates appliance status, "E1" - indicates 12V "E1" relay status, "E2" - indicates 12V "E2" relay status, "ERROR»" - indicates error and traffic, "CAN" - indicates BUS status.


Chassis earthing

Chassis external ground earthing, to suppress electromagnetic interference.



LAN

Ethernet 10/100 Base-T port, provides network connection.



Inlet 2A.jpg

Power input

The inlet uses 2A fuse (5x20mm) which can be easily changed.

Dimensions Width 440 x Height 44.45 (1U) x Depth 79.4 mm
Weight 1,5 kg
Inputs 8 analog sensors, CAN bus, HS USB, 4 dry contacts (3P, pitch 3,5mm, type IN)
Operating characteristics Humidity : Min. 5% - Max. 95% (Non-Condensing), Temperature : Min. -10° C - Max.80° C
Power input 90-240V, IEC C14, Fuse 2A
Network Interface CAN bus, 1-Wire (with extension), Ethernet 10/100 Mbit/s
Outputs SD card slot, USB port for saving logs (USB flash), Two 12V 0,25A outputs (pitch 3,81mm, 3P)
Mounting Desktop, Wall turnable mount (with extension), 19" rack mountable
Expansions (ordered separately) "VT10 / 1-Wire Board" or "VT18 / Extension board", VT700 / GSM modem
Power Consumption 12 Watt
Status Indicators Two relay status LEDs, LED indication for Power / Network connectivity, Error LED, LED indication for CAN bus connection
Components Manufactured in E.U.
Max. distance 300 m
HS Code 8471 50 000
Processor ARM926-300 MHz / 64 MB / Linux-2.6.38
Built-in sensors Power supply voltage sensor (1%), Temperature sensor (1%)
Package includes Warranty card, Short description and connection guide, Terminal plug 6 pins 3.5 mm 1pcs, Terminal plug 3 pins 3.81mm 1pcs, Self-adhesive rubber foot 4 pcs, Patch cable RJ-45 1m, Cable EU Schuko C13 0.5mm2 230V 10A, Screws 6pcs M3 8mm, 19" mounting brackets 2pcs
Accessories (ordered separately) VT112 / Rotatable mounting brackets, VT101 / Battery holder
Other Chassis grounding (M4 thread), Recovery switch, Restart button

Write a review

VT825 / Wide range monitoring unit

VT825 / Wide range monitoring unit

Middle level unit is used in computer rooms, remote & industrial facilities, offices. Can use up to 100 different elements - notifications, triggeres, timers, logics, sensors, dry contacts.

There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog.



Embedded monitoring and control web interface

Every Vutlan remote monitoring unit or PDU has an embedded web-interface. This interface allows the users to monitor and control all the sensors and devices connected to the unit by using a web browser. Simply connect the master unit to the network and enter it’s IP address in the web browser.

Login: guest

Password: guest

TRY DEMO


Support for SNMP based NMS software

Network monitoring software software monitor your network 24/7 to timely alert you to issues before they become emergencies. Allow you to achieve instant awareness of IT infrastructure problems, so downtime doesn't adversely affect your business. Usual NMS software offers complete monitoring and alerting for servers, switches, applications, and services. By integrating Vutlan’s environmental monitoring systems and PDUs, you achieve a complete control over your IT infrastructure in one place.

All Vutlan’s monitoring units support SNMP v.1, v.2c, v.3. Required MIB files are included with all Vutlan systems. So integrating Vutlan’s systems into your existing NMS is simple. Vutlan systems support the following NMS systems.


Vutlan units support the following NMS systems:

SEE THE LIST


Infrastructure monitoring program (Nagios)

Achieve instant awareness of IT infrastructure problems, so downtime doesn’t adversely affect your business. Nagios together with Vutlan plugin offers complete monitoring and alerting for servers, switches, applications, and services.

You can:

  • Monitor your entire IT infrastructure
  • Spot problems before they occur
  • Know immediately when problems arise
  • Share availability data with stakeholders
  • Detect security breaches
  • Plan and budget for IT upgrades
  • Reduce downtime and business losses

You can download and install Vutlan plugin directly into Nagios or download a disk image that includes VirtualBox, CentOS 6.5, Nagios 3.5.1 and Vutlan plugin preinstalled into Nagios.




Drivers & Recovery tools

All the drivers and recovery tools can be found at our documentation pages.

You will find:

  • Drivers - HTTP or USB upgrade
  • Firmware recovery tool - if the system does not respond
  • Settings recovery tool - for restoring factory settings
  • Reset Password tool - for resetting the password.
  • Detect security breaches
  • Plan and budget for IT upgrades
  • Reduce downtime and business losses

The documentation, explaining how to update or restore the units, as well as the drivers, can be found using following links:



Dublicator

This program is designed to clone the unit settings and units firmware update. This is needed in case you have multiple units and you require to copy all or some of the settings of one unit to other units.




Program to send SMS from your computer

Contains an application and a sample code in C.



Sensors to Optimize Your Environment

Support for up to 100 optional external plug-and-play environment sensors that monitor and help manage critical environmental conditions. the sensors use their 4 levels of threshold checking and report any status change.



Scalability

The amount of sensors and devices connected to one master module may be increased using embedded modules, extension units, CAN sensors and analog chainable sensors.






Two / Three Year Warranty

All our monitoring units have a 2 Year Warranty. Additional third year warranty can be purchased separately.




Embedded Web/Mobile Interface

Real-time remote monitoring of all sensor data and asset information and status of all devices in the rack. We offer easy to use web browser interface for settings changes and viewing real-time sensor status, setting up alerts and notifications from anywhere.


Related Products

Latest Blogs