When water is in contact with detection rope, sensor indicates the emergence of moisture. Water detection cable length: 6m, 10m, 17m, 25m, 50 m.
Available articles are: WDC 50, WDC 25, WDC 17, WDC 10 or WDC 6.
Warning: Last items in stock!
Max. distance from the unit is 225 meters. VT591 is an analog plug-and-play sensor, it is integration friendly and quick to reset. After the flooding, the leak detection cable can be dried and reused. For correct operation WDC sensing cable sensor requires VT591 / Water leak rope sensor. Detectable liquids: clean and distilled water; alcohols.
This inexpensive cable can detect any conductive liquid, but due to the design features can quickly clog up with salts and reacts to high humidity, a consequence - the impossibility of further use.
It is recommended to use only for the detection of spirits, pure and distilled water!
If customer has salted or dust water, acids, alkalys, high humidity or near dew point, please use WLC cable!
"WDC / Water detection rope requires "VT591 / Water leak rope sensor".
Connection and installation guide can be found here: "VT591 / Water Leak sensor connection"
Read more about water detection applications in our article: "Water leakage detection using cable sensor and spot sensor"
|Dimensions||∅3 mm, length - 6, 10, 17, 25, 50 m.|
|Operating characteristics||Note. WDC can detect dew point as water!|
|Max. distance||225 m|
|HS Code||8544 49 200|
|Special Features||Conductor: 27% Ni; Cu.|
|Package includes||One self-adhesive holder on each 2 m.|
Needed for connection of different sensors on a long distances or for 1-wire...