VT8101T / Monitoring unit with DC power supply

The unit with isolated DC 24-48V inputs is used for temperature, humidity, voltage, leakage, smoke, airflow, doors control in the server rooms, for monitoring of cabinets and facilities. Can connect up to 100 elements, one GSM modem, USB-cam and 16 dry contacts.

End-of-sales: 31.12.2016

Add to wishlist

 Add to comparison


Relay ports

It is possible to connect up to 3 loads managed by built-in relays. Built-in relays have independent separate IO. The appliance uses latching relays, when power on appliance switches on/off, relays remain in command position!



Reader

I-Touch button or ITouch Proximity readers can be connected to the "Reader" port. The reader is determined automatically.


CAN

Simplifies installation and management by connecting multiple extension units together to share the IP address to which they are connected.


Analog inputs

Connect analog sensor by a supplied RJ-11 (6P4C) cable to any analog "A1 .. A8" port. Determination of the sensor type and connection will occur automatically. 


Extension: Dry contacts board VT16

VT8101T has the possibility to install dry contacts board. It is a board mounted and connected inside of master unit. Can be used together with any contacts, for example with door or window contacts, circuit breakers etc.


Extension: GSM modem

VT8101T has the possibility to install GSM modem. The device is mounted and connected inside of master unit. It is used for sending SMS notifications and receiving SMS commands.


Alarm beacon / Strobe light

Appliance has the possibility to connect alarm beacons to the 12V output and to the "Reader" input.


USB camera / IP cameras

USB camera (class Linux UVC Webcam which supports MPEG) can be connected to "HS" port. Using built-in interface it is possible to add IP cameras. 




DC power 24-48V

The unit supplied by 24-48 V (mostly used by Telecom companies) and can be purchased with 1 or 2 DC inputs. In case the first power input shut down, the system can automatically start to use the second power input.

DC 24-48V inputs are isolated from the earth! Customer can use either + or - on the ground.


Backup power DC 12V


Chassis earthing


SD card slot

Monitoring unit uses SD-card to record changes in: logs, sensor data, configuration, elements.


LAN / USB

Weight 1.8kg
Inputs 2 x RJ-12, 8 analog sensors, 1-Wire (iTouch reader), 12V power backup, HS USB
Operating characteristics Humidity : Min. 5% - Max. 95% (Non-Condensing), Temperature : Min. -10° C - Max.80° C
Power input +/- 24 / 48V
Network Interface Ethernet 10/100 Mbit/s, CAN open
Outputs 12V, 3 relay terminals (240V, 10A, latching relays), Reader alarm relay 12V, GSM modem slot, SD card slot
Mounting 19" rack mountable
Extension protocols CAN
Expansions (ordered separately) VT16 / Dry contacts board , VT920 / GSM modem
Power Consumption 6-18 Watt
Status Indicators LED indication for Power / Network connectivity, LED indication for CAN bus connection, Error LED, Relays status LEDs
Components Manufactured in E.U.
Max. distance 225 m
HS Code 8471 50 000
Processor ARM926-400 MHz / 64 MB / Linux-2.6.38

Write a review

VT8101T / Monitoring unit with DC power supply

VT8101T / Monitoring unit with DC power supply

The unit with isolated DC 24-48V inputs is used for temperature, humidity, voltage, leakage, smoke, airflow, doors control in the server rooms, for monitoring of cabinets and facilities. Can connect up to 100 elements, one GSM modem, USB-cam and 16 dry contacts.

End-of-sales: 31.12.2016



Embedded monitoring and control web interface

Every Vutlan remote monitoring unit or PDU has an embedded web-interface. This interface allows the users to monitor and control all the sensors and devices connected to the unit by using a web browser. Simply connect the master unit to the network and enter it’s IP address in the web browser.

Login: guest

Password: guest

TRY DEMO


Support for SNMP based NMS software

Network monitoring software software monitor your network 24/7 to timely alert you to issues before they become emergencies. Allow you to achieve instant awareness of IT infrastructure problems, so downtime doesn't adversely affect your business. Usual NMS software offers complete monitoring and alerting for servers, switches, applications, and services. By integrating Vutlan’s environmental monitoring systems and PDUs, you achieve a complete control over your IT infrastructure in one place.

All Vutlan’s monitoring units support SNMP v.1, v.2c, v.3. Required MIB files are included with all Vutlan systems. So integrating Vutlan’s systems into your existing NMS is simple. Vutlan systems support the following NMS systems.


Vutlan units support the following NMS systems:

SEE THE LIST


Infrastructure monitoring program (Nagios)

Achieve instant awareness of IT infrastructure problems, so downtime doesn’t adversely affect your business. Nagios together with Vutlan plugin offers complete monitoring and alerting for servers, switches, applications, and services.

You can:

  • Monitor your entire IT infrastructure
  • Spot problems before they occur
  • Know immediately when problems arise
  • Share availability data with stakeholders
  • Detect security breaches
  • Plan and budget for IT upgrades
  • Reduce downtime and business losses

You can download and install Vutlan plugin directly into Nagios or download a disk image that includes VirtualBox, CentOS 6.5, Nagios 3.5.1 and Vutlan plugin preinstalled into Nagios.




Drivers & Recovery tools

All the drivers and recovery tools can be found at our documentation pages.

You will find:

  • Drivers - HTTP or USB upgrade
  • Firmware recovery tool - if the system does not respond
  • Settings recovery tool - for restoring factory settings
  • Reset Password tool - for resetting the password.
  • Detect security breaches
  • Plan and budget for IT upgrades
  • Reduce downtime and business losses

The documentation, explaining how to update or restore the units, as well as the drivers, can be found using following links:



Dublicator

This program is designed to clone the unit settings and units firmware update. This is needed in case you have multiple units and you require to copy all or some of the settings of one unit to other units.




Program to send SMS from your computer

Contains an application and a sample code in C.



Sensors to Optimize Your Environment

Support for up to 100 optional external plug-and-play environment sensors that monitor and help manage critical environmental conditions. the sensors use their 4 levels of threshold checking and report any status change.



Scalability

The amount of sensors and devices connected to one master module may be increased using embedded modules, extension units, CAN sensors and analog chainable sensors.






Two / Three Year Warranty

All our monitoring units have a 2 Year Warranty. Additional third year warranty can be purchased separately.




Embedded Web/Mobile Interface

Real-time remote monitoring of all sensor data and asset information and status of all devices in the rack. We offer easy to use web browser interface for settings changes and viewing real-time sensor status, setting up alerts and notifications from anywhere.


Product catalog

Created: June 2015. Includes: product descriptions, solutions, monitoring software, scalability diagrams and company info.

Download (5.52M)

Related Products

Latest Blogs

Cookies and You
We use cookies on this website. You are free to manage these via your browser settings at any time. For more about how we use cookies, please see our Privacy Policy.
I accept
I do not accept