The unit is used for control of multi dry contacts premises, temperature, humidity, voltage, leakage, smoke, airflow, doors control. Can control up to 120 Dry contacts and use 1000 different elements - notifications, triggeres, timers, logics, sensors, dry contacts. Uses DC 48V power power supply
Warning: Last items in stock!
Supplied together with the base model. The board provides a two wire interface by adding 16 dry contact inputs.
Ordered separately. Replaces default VTX16 board in bank A. Adds a 2-wire interface: 32 dry contact inputs + 8 isolated dry contact outputs.
Ordered separately. Adds contacts to bank B. Adds a 2-wire interface: 32 dry contact inputs + 8 isolated dry contact outputs.
Ordered separately. Adds contacts to bank C. Adds a 2-wire interface: 32 dry contact inputs + 8 isolated dry contact outputs.
Saving logs of sensor data for analysis and evaluation;
Record digital video and audio to remote servers or internal SATA drive. Stream video directly to the operator via analog or through a web interface.
Linux based software. For example, NMS SNMP built in client, database, SMS server;
and other possibilities...
Multi-language support. Possibility to add new languages using a translation file.
First time wizzard for configuraing basic settings: Language, Time, Network, SNMP, Users.
VT710 / LTE modem is ordered separately. Possible to connect: LTE main, LTE auxiliary, GPS antennas. Has Mini SIM card slot and LED modem status indicator. Used for Ethernet over LTE and SMS notifications.
Connect sensor by a supplied RJ-11 (6P4C) cable to any sensor port "A1 .. A8". Determination of the sensor type and connection will occur automatically. Possible to connect up to 100 analog sensors using "VT408 / Sensor extension unit"
E1-E2 for 12V 0.25A outputs; R1-R2 for relays; STATUS indicates appliance status; CAN indicates CAN bus status; HDD indicates SATA status; ERROR indicates error and traffic.
Monitoring unit uses SD-card to record changes in: logs, sensor data, configuration elements. Firmware update can also be done using SD card.
USB0 is a type miniAB USB port 2.0. Can connect Modbus sensors using VT485; USB camera; or connect a PC for restoring an appliance; or connect USB flash for saving logs.
Used for connection of an access reader or accurate 1-Wire sensors.
Analog video & audio input and output (connector type TRRC). DC 12V 0.25A power supply output for an analog camera. Requires SATA to be installed inside the unit.
Two outputs, DC 12V 0.25A each with LED indicators in the front panel.. Can connect, for example, light tower, magnetick/bolt lock, electric latch, siren. Can be ordered:
Two loads (latching relays with LEDs indicators on front panel). Used to control large flow of electrical current with smaller flow of current. Example include confitioners, lights.
The unit has x16 dry contact inputs (two wire interface). Used for contacts of windows, doors, fire / burglar alarms, power systems, exit / push buttons. VTX16 is supplied by default. Can be replaced by "VTX40a / Dry contacts board".
Ordered separately. Replaces default VTX16 board in bank A. Adds a 2-wire interface: x32 dry contact inputs + x8 isolated dry contact outputs.
Save sensor and system data to USB Flash drive, FTP, Mail, Syslog server or using SATA. Possible to specify saved sensors, lifetime of files and enable detailed Logs. Configuration...
Provide centralized control access to multiple monitoring devices on a network. Also needed when an individual user configuration on each monitoring device is too time consuming. Access via Radius server
Configurable logic schemes
Logic schemes are used to specify automatic actions to events that occur in the system. Conditions “IF” are combined using “AND” & “OR”and executed using “THEN”. Adding logic schemes
Detailed graphs and data tables for one or more sensors using multi-plot graph.
Integrates with network management systems via SNMP v1, SNMP v2c and encrypted SNMP v3. API overview
Notifications are intended to inform the user about events occurring in the monitoring system. Vutlan systems support notifications by E-mail, SMS, SMS Gate, Web-to-SMS. Physical notifications are possible using alarm beacons, light towers, sirens. Environmental control
Full range of sensors & outputs
Vutlan provides full range of sensors and control devices. For example: Temperature, Humnidty, Vibration, Leakage detection, Water & Fuel level, AC/DC measurement, Airflow, Smoke detection, Motion, Access, Relays, Dry Contacts, Outlets, Cameras, Dry Contacts and other. Access via Radius server
Virtual sensors & elements
Possible to add 9 virtual elements: Group, E-mail (message), SNMP trap, SMS, Timer, Trigger, PING, SNMP Get, IP Cam. Read more
User access & permissions
Using “view” and “write” rights, user access can be restricted to the subsystems of the device using groups of access permission. User access can also be restricted to a specific group of sensors. Read more
Monitor your entire IT infrastructure;
Spot problems before they occur;
Know immediately when problems arise;
Share availability data with stakeholders;
Detect security breaches;
Plan and budget for IT upgrades;
Reduce downtime and business losses;
Allows to increase the number of sensors connected to any monitoring unit....
Simple reliable monitoring unit with digital inputs for cost effective remote...
480P HD Bullet USB IR Camera 2.0&1.1 UVC, 0.3 megapixel, water resistent.
Relay switchable contact. Can be used together with equipment, for example...
The unit is used for temperature, humidity, voltage, leakage, smoke, airflow,...
At installation on Air conditioners, fans, etc., sensor controls airflow 0 -...
When water is in contact with leak cable, sensor indicates the emergence of...
Wall mounting brackets for VT335 S and for VT408 for mounting on to the wall....
4G LTE, GPS modem for Vutlan monitoring units (VT900, VT900 DC, VT960, VT960...
Bidirectional hall current sensor is used for measurement of DC current....