Simple reliable monitoring unit with digital inputs for cost effective remote computer room monitoring with all possible sensors. Used power supply DC 48V used in Telecom sites.
There are built-in servers and agents like HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP, Wachdog. Can use up to 100 different elements - notifications, triggeres, timers, logics, sensors, dry contacts.
Warning: Last items in stock!
Connect sensor by a supplied RJ-11 (6P4C) cable to any sensor port "A1 .. A4". Determination of the sensor type and connection will occur automatically.
Temperature sensor is built-in on VT335 DC board and sticks out on the front panel of the unit for better measurement. Accuracy equals +/- 1°C.
The module has two 12V 0.25A outputs (electronics relays). E.g. the appliance has the possibility to connect flash lights or sirens managed by built-in electronic relay.
Connecting CAN devices on a common bus allows you to collect data from the sensors with a large area, or from a large distance and to transmit them to the network.
VT335 DC has 4 dry contact inputs. Can be used together with any contacts, for example with door or window contacts, circuit breakers etc.
VT335 DC has the possibility to install GSM or LTE, GPS or USB modem. VT700 / GSM modem for sending SMS notifications and receiving SMS commands. VT760 / LTE, GPS modem for establishing ethernet connection using GPS or for sending and receiving commands over LTE.
Using built-in interface it is possible to add up to four IP cameras. This will allows to view footagefrom surveillance cameras remotely,
One USB camera (class Linux UVC Webcam which supports MPEG) can be connected to "HS-USB" port. More USB devices can be connected to one HS USB port using USB hub.
USB flash drive can be connected to VT335 DC using OTG miniUSB cable. Flash drive is used by the system for saving logs. More USB devices can be connected to one HS USB port using USB hub.
Especially used by Telecom operators.
Chassis external ground earthing, to suppress electromagnetic interference.
Ethernet 10/100 Base-T port, provides network connection.
"ACT" - indicates appliance status, "E1" - indicates 12V "E1" relay status, "E2" - indicates 12V "E2" relay status, "ERROR»" - indicates error and traffic.
Type miniAB USB-port 2.0, Can connect USB camera; or connect a PC for restoring an appliance; or connect USB flash for saving logs.
|Dimensions||194 x 33 x 80 mm|
|Operating characteristics||Temperature : Min. -10° C - Max.80° C, Humidity : Min. 5% - Max. 95% (Non-Condensing)|
|Power input||DC 48V|
|Network Interface||Ethernet 10/100 Mbit/s, 1-Wire (with extension), CAN bus|
|Outputs||GSM, LTE, GPS SMA (with extension)|
|Mounting||Wall mounts (ordered separately) DIN rail (ordered separately)|
|Extension protocols||1-Wire, CAN|
|Expansions (ordered separately)||VT760 / LTE, GPS modem|
|Power Consumption||6 Watt|
|Status Indicators||LED indication for Power / Network connectivity, LED indication for CAN bus connection, Error LED, Relays status LEDs|
|Components||Manufactured in E.U.|
|Max. distance||225 m|
|HS Code||8471 50 000|
|Processor||ARM926-300 MHz / 64 MB / Linux-2.6.38|
|Built-in sensors||Temperature sensor (1%)|
|Device management||SNMP, Web Browser, manually via SMS|
|Package includes||USB-Min to USB cable|
|Accessories (ordered separately)||19" bracket DIN rail mount Wall mounts|
|Other||Chassis grounding (M4 thread), Recovery switch, Restart button|
Room guard unit VT325 - lower cost server room temperature monitor. There are...
Simple reliable monitoring unit with digital inputs for cost effective...